S100

Vario-flight recorder-Bluetooth-Backup battery!

 

LX UL7

 

Standalone digital variometer, final glide calculator, IGC flight recorder and navigation system with moving map. • Extremely bright 3.5’’ (9cm) color display, readable in all sunlight conditions with the ability to adjust the backlight. • Two rotary switches (knobs) with push button function and three push buttons are used for input. • Flarm and PDA inputs/outputs • Flarm Indication, when Flarm is connected to the GPS port • Additional Flarm radar screen and artificial horizon (optional) • Inertial assisted high precision pressure sensors • Built-in voice module and AHRS (enabled optionally) • IGC high level approved flight recorder • Integrated Bluetooth module • Internal battery with up to 3h autonomy • Integrated GPS module • Easy firmware upgrades via SD card • fast wind calculation with external compass • built in battery which servers up to 3h of operation • Bluetooth integrated • Indicator Ø80mm
 
  • Bluetooth integrated
  • Built-in Battery which serves up to 3h of operation
  • Highest level approved IGC flight recorder (for all flights)
  • ENL (Engine noise level) sensor
  • Built in GPS module
  • ARM Cortex-M4 processor running on 160MHz
  • 3.5'' QVGA sunlight readable screen with 1200nits
  • QVGA (320*240pixels) sunlight readable display
  • Digital temperature compensated pressure sensors for altitude and airspeed
  • inertial platform: 3 axis digital +-8g accelerometer, 3 gyroscopes (for inertial vario, AHRS and wind calculation - AHRS can be activated with the code)
  • Smooth audio output
  • Audio equalizer
  • integrated synthesized speech output 
  • audible thermal assistant
  • External SD card for configuration, flarmnet and firmware update
  • 2 rotary switches (knobs) with push button function and 3 push buttons are used for input
  • ALS (ambient light sensor)
  • 6 digital inputs 
  • 80 mm air norm size

 

  • Moving map with airspace track up option
  • Airspace display
  • Waypoints and Task display
  • AHRS display (optional)
  • Thermal assistant
  • Display of 4 configurable (navboxes) values
  • Display of 3 configurable (navboxes) values on map screen
  • Waypoint navigation
  • TASK navigation
  • Flarm radar
  • Flarm warnings
  • Flarm Net
  • Logbook (Integrated High level approved flight recorder)

 

  • 16 bit color display
  • 3.5” (9cm) screen
  • 320 by 240 pixel resolution
  • 1200 cd brightness

 

  • Flarm port input/output on RS232 level (standard IGC 6 pin connector RJ11)
  • PDA port input/output on RS232 or TTL level for PDA/PNA devices with 5V power supply (8 pin RJ 45, 5V output max 2A)
  • Audio output
  • 1Mbit CAN bus for connection for SxxD repeater, Compass module , MOP sensor or Remote stick
  • Speed command and Vario priority input and 4 additional user defined inputs
  • Two Rotary knobs with push function
  • 3 push buttons

 

  • AHRS activation with a CODE - no need of for any hardware upgrade
  • Remote stick (CAN)
  • Compass module (not supported yet - under development)
  • MOP sensor (not supported yet - under development)
  • S8xD/S10xD repeater unit
  • Oudie
  • Nano/Nano3/Nano4
  • FLAP sensor

 

  • Power input 10-16V DC
  • Consumption of LXNAV S100 at 12 V:
    • 250 mA - minimum brightness without audio
    • 340 mA - maximum brightness without audio
  • Consumption of LXNAV S80D at 12 V:
    • 90 mA - minimum brightness without audio
    • 140 mA - maximum brightness without audio

 

  • 80 mm (3.15") standard aircraft cut-out for the LXNAV S100 indicator unit
  • Size: 81x81x64mm
  • Weight: 515g

 

 

 
Copyright © LXNAV 2016 All rights reserved.
LXNAV
Kidričeva 24a, Celje, savinjska.
Phone: +386 592 33 400

We use cookies to improve our website and your experience when using it. Detail information..

I accept cookies from this site

EU Cookie Directive Module Information