Vario-flight recorder-Bluetooth-Backup battery!




Standalone digital variometer, final glide calculator, IGC flight recorder and navigation system with moving map. • Extremely bright 2.5’’ (~ 6.5cm) color display, readable in all sunlight conditions with the ability to adjust the backlight. • Two rotary switches (knobs) with push button function and three push buttons are used for input. • PDA inputs/outputs • Flarm Indication, when Flarm is connected to the GPS port • Additional Flarm radar screen and artificial horizon • Inertial assisted high precision pressure sensors • Built-in voice module and AHRS • IGC high level approved flight recorder • Integrated Bluetooth module • Internal battery with up to 3h autonomy • Integrated GPS module • Easy firmware upgrades via SD card • fast wind calculation with external compass • Indicator Ø57mm
    • Bluetooth integrated
    • Built-in Battery which serves up to 3h of operation
    • Highest level approved IGC flight recorder (for all flights)
    • ENL (Engine noise level) sensor
    • Built in GPS module
    • ARM Cortex-M4 processor running on 160MHz
    • 2.5'' QVGA sunlight readable screen with 1200nits
    • QVGA (320*240pixels) sunlight readable display
    • Digital temperature compensated pressure sensors for altitude and airspeed
    • inertial platform 3 axis digital +-8g accelerometer, 3 gyroscopes (for inertial vario, AHRS and wind calculation - AHRS can be activated with the code)
    • Dual pressure Technology
    • Smooth audio output
    • Audio equalizer
    • integrated synthesized speech output 
    • audible thermal assistant
    • External SD card for configuration, flarmnet and firmware update
    • 2 rotary switches (knobs) with push button function and 3 push buttons are used for input
    • ALS (ambient light sensor)
    • 6 digital inputs - SC, VP + 4 custom defined
    • 57 mm air norm


  • Moving map with airspace track up option
  • Airspace display
  • Waypoints and Task display
  • AHRS display (optional)
  • Thermal assistant
  • Display of 4 configurable (navboxes) values
  • Display of 3 configurable (navboxes) values on map screen
  • Waypoint navigation
  • TASK navigation
  • Flarm radar
  • Flarm warnings
  • Flarm Net
  • Logbook (Integrated High level approved flight recorder)
  • 16 bit color display
  • 2.5”(~ 6.5cm) screen
  • 320 by 240 pixel resolution


  • Flarm port input/output on RS232 level (standard IGC 6 pin connector RJ11)
  • PDA port input/output on RS232 or TTL level for PDA/PNA devices with 5V power supply (8 pin RJ 45, 5V output max 2A)
  • Audio output
  • 1Mbit CAN bus for connection for SxxD repeater, Compass module, MOP sensor or Remote stick
  • Speed command and Vario priority input and 4 additional user defined inputs
  • Two Rotary knobs with push function
  • 3 push buttons


  • AHRS activation with a CODE - no need of for any hardware upgrade
  • Remote stick (CAN)
  • Compass module (not supported yet - under development)
  • MOP sensor (not supported yet - under development)
  • S8xD/S10xD repeater unit
  • Oudie
  • Nano/Nano3
  • FLAP sensor


  • Power input 10-16V DC
  • Consumption of LXNAV S10 at 12 V:
    • 230 mA - minimum brightness without audio
    • 270 mA - maximum brightness without audio
  • Consumption of LXNAV S8D at 12 V:
    • 90mA - maximum brightness
    • 140 mA - maximum brightness without audi


  • Standard 57mm (21") hole
  • 61x61x70mm(exclusive connectors)
  • weight: 345gr



Copyright © LXNAV 2016 All rights reserved.
Kidričeva 24a, Celje, savinjska.
Phone: +386 592 33 400

We use cookies to improve our website and your experience when using it. Detail information..

I accept cookies from this site

EU Cookie Directive Module Information